525nm 1.5W
525nm 1.5W
Price on request
Specifications
| Module series: |
Monolith |
| Model Nr.: |
M-525LM-1.5k |
| Optical power: | 1500 mW |
| Laser class according to IEC 60825-1 standard: |
4 |
| Center wavelength: | 525 nm |
| Center wavelength tolerance: | ± 5 nm |
| Spectral width: |
< 2 nm |
| Center wavelength thermal drift: |
0.8 nm per 10 °C |
| Beam size (1/e2): |
TBD |
| Beam divergence (half angle): |
TBD |
| Linear polarization: |
Y |
| Polarization ratio: |
100:1 |
| Polarization azimuth tolerance: |
± 5 degree |
| Mode structure: |
Multi-mode |
|
M2 (horizontal/vertical): |
TBD |
| Power stability (over 1 hour, CW operation, after warm-up and ±3°C): |
< 0.5 % |
| Pointing stability (over 1 hour, CW operation, after warm-up and ±3°C): |
< ±100 µrad |
| Output window beam centering: |
< ±1 mm |
| Beam perpendicularity: |
< ±1 degree |
| Warm-up time: |
< 5 minute |
| Laser power control modes: |
Analog, TTL, USB, potentiometer |
| Analog input signal: |
0 - 5V (0.5 - 4.5 V with TCCO* on) |
| TTL input signal: |
0 - 0.8 V: low 2 - 5 V: high |
| Bandwidth (analog input, 3 dB cut-off frequency): |
240 kHz (252 kHz with TCCO* off) |
| Rise time (10% - 90%): |
700 - 900 ns (signal dependent) |
| Fall time (90% - 10%): |
1 - 2 µs (signal dependent) |
| Phase shift: |
0.6 - 4 µs (signal dependent) |
| Analog/TTL input impedance: |
5 kΩ |
| Conection cable (laser head to control box): |
HDMI 1.4 or higher, max. length 1m |
| Communication with PC: |
USB-C (control box port only) |
| USB interface protocol |
|
| Interlock: |
Shorted: emission enabled (3.3V, 10 kΩ) Opened: emission disabled |
| Operating base plate temperature range: |
< 50 °C |
| Operating ambient temperature range: |
5 - 40 °C (heat sink dependent) |
| Storage temperature range: |
(-10) - 80°C |
| Ingress protection (laser head only): |
IP64 |
| Power consumption: |
typ. 20W max. 50W |
| Input voltage (Type PD): | min. 20V |
| Input voltage connector type: |
USB-C (laser head port only) |
| Laser head dimensions (LxWxH): |
70(84) x 120 x 46 mm |
| Laser head weight: |
0.7 kg |
| Control box dimensions (LxWxH): |
53 x 29 x 36 mm (without connectors) |
| Control box weight: |
40 g |
| Expected lifetime: |
> 10 000 hours |
Downloads
525nm 1.5W Product Specifications